Magnetic mTripod, Руководство пользователя

Страница: 56 / 92

56
Control unit MGC mTripod
Description of menus and parameters
Operational view > Main menu > Service > Gate HW
Parameter Description
Align home position If the correction of the centre position of the blocking arm via the "Homing
offset" parameter is uncomfortable, you can manually align the centre
position of the blocking arm via the "Align home position" parameter.
You start the process via the "[ X ]: Activated" option. First, the drive
executes a homing. At the same time the message "Please wait" appears on
the display. As soon as the message disappears, the motor is de-energised
and you can turn the blocking arm to the centre position. The new position
is adopted after 10 seconds. The "Homing offset" parameter is adjusted.
Options
›
[ ]: Deactivated
›
[ X ]: Activated
Factory setting
›
[ ]: Deactivated
Drop arm For turnstiles with "Drop arm" option, select the "[ X ]: Activated" option.
For turnstiles without "Drop arm" option, select the "[ ]: Deactivated"
option.
Options
›
[ ]: Deactivated
›
[ X ]: Activated
Factory setting
›
Depending on the order
›
If only one control unit was ordered, the factory setting is [ ]: Deactivated
Table 27: Gate HW
6.4.2 Further parameters
Operational view > Main menu > Service
Parameter Description
Cycles Display of complete passage procedures.
Fraud L Display of the number of detected vandalism / fraud attempts
Fraud R Display of the number of detected vandalism / fraud attempts
Operation Displays the operating hours counter. The operating hours counter records
the time, during which the pedestrian gate is supplied with electrical power.
System time Displays the internal date and the internal clock.