Magnetic mTripod, Руководство пользователя

Страница: 40 / 92

40
Control unit MGC mTripod
Parameterisation directly at the control unit MGC
5.5.2 Further symbols
Function Description
Wrong password entered. Access denied.
Reset values to factory settings. To do this, you must enter the
password "0000".
There is an information. Check the "Information" menu. To do this,
press the left operating button.
There is a warning. Check the "Information" menu. To do this, press
the left operating button.
There is an error. Check the "Information" menu. To do this, press
the left operating button.
The passage direction from left is released.
The passage direction from right is released.
The passage is enabled in both directions.
Table 18: Further symbols