Magneti Marelli TPMS CONNECT EVO, Быстрое руководство

Страница: 58 / 174

20
Specifically, you may perform the “vehicle test” when the vehicle
is brought in (as outlined in paragraph 12.6) and save the test;
upon vehicle delivery, you may call up the vehicle log and check -
together with the owner - that sensors are operating properly and
are still in the same positions as when the vehicle was brought in. This way, you
can establish that any TPMS malfunction has nothing to do with tire repair.
15.2. Sensors Data Log:
This function lets you view Sensor Test results.
15.3. Upload to PC:
This function lets you upload all data stored in the tester to your PC via the USB port.
16. Vehicle remote control test
The purpose of this function is to check radio frequency data transmission from
vehicle remote control devices and battery charge. To ensure accurate test results,
perform this test well away from any radio frequency signal sources.
Step Screen page Description
1 Select option Remote Test from the main menu
page RF KEY
2 Select frequency
3 A message to move away from other radio-
frequency source, such as automatic gates,
wireless devices, is displayed.
Then press ENTER
4 The diagnostic tester will display RF monitor as
well as the number of data received on frequency
in use.
Press ESC to exit