Magneti Marelli TPMS CONNECT EVO, Быстрое руководство

Страница: 57 / 174

19
8 If the tester receives the correct data from the
valve, it will beep and display pressure,
temperature, battery state and ID (identification
code).
Press to test the next wheel; press Esc to
return to step 6.
…. Steps 6 through 8 are repeated to test the other
vehicle wheels.
18 The tester displays a screen page with ID.
19 Is possible to see also the pressures collected
,selecting
Once the tester is finish, is possible to save it
into the test database selecting
The latter case is likely due to an oversight during the test procedure. Two valves with the same ID
installed on the same vehicle are a rare occurrence.
15. Test database
This function lets you manage, view and repeat any tests performed during past
sessions.
15.1. Vehicle Data Log:
This function lets you view Vehicle Test results saved during past sessions. You may
also use the “Location Test” function to determine whether the sensors installed on
the vehicle are still in the same positions as when the test was saved.