Magnetek Impulse G+ series 4, Инструкция по эксплуатации

Страница: 273 / 276

IMPULSE®•G+ & VG+ Series 4 Instruction Manual – February 2017
A-19
T01-01 Tuning Mode Sel 0 0–2 -- 4-17
T01-02 Rated Horsepower ** -- HP 4-17
T01-03 Rated Voltage ** -- VAC 4-17
T01-04 Rated Current ** -- A 4-17
T01-05 Rated Frequency 60.0 -- Hz 4-17
T01-06 Number of Poles 4 -- Poles 4-17
T01-07 Rated Speed 1750 -- RPM 4-17
T01-08 PG Pulses/Rev 1024 -- PPR 4-17
T01-09 No-Load Current -- -- -- 4-18
T01-10 Motor Rated Slip -- -- -- 4-18
U01-01 Frequency Ref -- -- Hz 5-131
U01-02 Output Freq -- -- Hz 5-131
U01-03 Output Current -- -- A 5-131
U01-04 Control Method -- -- -- 5-131
U01-05 Motor Speed -- -- Hz 5-131
U01-06 Output Voltage -- -- VAC 5-131
U01-07 DC Bus Voltage -- -- VDC 5-131
U01-08 Output HP -- -- HP 5-131
U01-09 Torque Reference -- -- % 5-131
U01-10 Input Term Sts -- -- -- 5-131
U01-11 Output Term Sts -- -- -- 5-131
U01-12 Int Ctl Sts 1 -- -- -- 5-132
U01-14 CPU 1 SW Number -- -- -- 5-132
U01-15 Term A1 Level -- -- % 5-132
U01-16 Term A2 Level -- -- % 5-132
U01-17 Term A3 Level -- -- % 5-132
U01-20 SFS Output -- -- Hz 5-132
U01-21 AI Opt Ch1 Level -- -- % 5-132
U01-22 AI Opt Ch2 Level -- -- % 5-132
U01-23 AI Opt Ch3 Level -- -- % 5-132
U01-24 Opt Out -- -- -- 5-132
U01-25 Opt In Low -- -- -- 5-132
U01-26 Opt In High -- -- -- 5-132
U01-28 CPU 2 SW Number -- -- -- 5-132
U01-29 Load Weight -- -- -- 5-132
U01-30 SS Delta Speed -- -- Hz 5-132
U01-34 OPE Error Code -- -- -- 5-132
U01-39 Transmit Error -- -- -- 5-132
U01-44 ASR Out w/o Fil -- -- % 5-132
U01-50 Hook Height -- -- % 5-132
U01-51 Motor Revolution -- -- Revs 5-132
Parameter Parameter Name Default Range Units Reference
* Initial value set by X-Press Programming (Table 4-6, 4-7, or 4-8 on pages 4-12, 4-13, and 4-14).
** Initial value dependent on drive size, which is determined by O02-04 (kVA Selection).
*** Value is automatically set during auto tuning.
**** 0.0–25.5 seconds is extended to 0.0–6000.0 seconds when B05-16 = 1.