Magnetek Impulse G+ series 4, Инструкция по эксплуатации

Страница: 264 / 276

IMPULSE®•G+ & VG+ Series 4 Instruction Manual – February 2017
A-10
D04-37 NLB Strt ASR Dly 0.50 0.00–2.55 sec 5-59
D05-01 Torq Control Sel 0 0, 1 -- 5-61
D05-02 Torque Ref Filter 0 0–1000 ms 5-61
D05-03 Speed Limit Sel 2 1, 2 -- 5-61
D05-04 Speed Lmt Value 105 -120–120 % 5-61
D05-05 Speed Lmt Bias 10 0–120 % 5-61
D05-06 Ref Hold Time 0 0–1000 ms 5-61
D05-08 Drctn SpdLmt Sel 1 0, 1 -- 5-61
D08-01 Dwell Ref @ Start 0.0 0.0–150.0 Hz 5-64
D08-02 Dwell Time @ Start 0.0 0.0–10.0 sec 5-64
D08-03 Dwell Ref @ Stop 0.0 0.0–150.0 Hz 5-64
D08-04 Dwell Time @ Stop 0.0 0.0–10.0 sec 5-64
D09-01 SCrv Acc @ Start 0.20* 0.00–10.00 sec 5-65
D09-02 SCrv Acc @ End 0.20* 0.00–10.00 sec 5-65
D09-03 SCrv Dec @ Start 0.20* 0.00–10.00 sec 5-65
D09-04 SCrv Dec @ End 0.20* 0.00–10.00 sec 5-65
D10-01 Heavy/NormalDuty 0 0, 1 -- 5-66
D10-02 CarrierFreq Sel 1 1–9, A, F -- 5-66
D10-03 CarrierFreq Max 2.0 1.0–15.0 kHz 5-66
D10-04 CarrierFreq Min 2.0 1.0–15.0 kHz 5-66
D10-05 CarrierFreq Gain 0 0–99 -- 5-66
D11-01 Hunt Prev Select 1 0, 1 -- 5-67
D11-02 Hunt Prev Gain 1.00 0.00–2.50 -- 5-67
D11-03 Hunt Prev Time 10 0–500 ms 5-67
D11-05 REV Hunt Pref Gn 0.00 0.00–2.50 -- 5-67
E01-01 Input Voltage 230V: 230
460V: 460
575V: 575 230V: 155–
255
460V: 310–
510
575V: 446–
733
VAC 5-68
E01-03 V/f Selection * V/f: 0–9, A–
F, FF
OLV: F, FF
-- 5-70
E01-04 Max Frequency 60.0 40.0–150.0 Hz 5-70
E01-05 Max Voltage ** 230V: 0.0–
255.0
460V: 0.0–
510.0
575V: 0.0–
733.1
VAC 5-70
E01-06 Base Frequency 60.0 0.0–150.0 Hz 5-70
E01-07 Mid Frequency A Determined
by E1-03
0.0–150.0 Hz 5-70
Parameter Parameter Name Default Range Units Reference
* Initial value set by X-Press Programming (Table 4-6, 4-7, or 4-8 on pages 4-12, 4-13, and 4-14).
** Initial value dependent on drive size, which is determined by O02-04 (kVA Selection).
*** Value is automatically set during auto tuning.
**** 0.0–25.5 seconds is extended to 0.0–6000.0 seconds when B05-16 = 1.