Notes:
1) When Up/Down command is selected, the upper limit speed is set
regardless of frequency reference.
Upper limit speed = (maximum output frequency x frequency reference upper limit)/100
(n
n 2
2 4
4 )
(n
n 4
4 1
1 )
2) The lower limit value is either the minimum output frequency (n
n 2
2 9
9 ) or
the frequency reference lower limit (n
n 4
4 2
2 ), whichever is greater.
3) When FWD (REV) Run command is input, operation starts at the lower
limit speed without an Up/Down command.
4) If the Jog command is input while the drive is running by the Up/Down
command, the Jog command has priority.
31
for more: efesotomasyon - Yaskawa drive
