Magnetek GPD 205, Техническое руководство

Страница: 30 / 88

Table 3-1. GPD 205 Constants - Continued
Setting Range Setting Factory Ref.
Constant Name
(and units) Increment Setting Page
n24 Maximum frequency (Fmax) 50.0 - 400 (Hz) 0.1 60.0 37
(< 100 Hz);
1
(
≥
100 Hz)
n25
Maximum voltage (Vmax) 1 - 255/510 (V) * 1 230/460 *
n26 Maximum voltage frequency (Fa) 0.6 - 400 (Hz)
0.1
60.0
(< 100 Hz);
n27 Frequency midpoint (Fb) 0.5 - 399 (Hz)
1
1.5
(
≥
100 Hz);
n28 Voltage midpoint (Vc) 1 - 255/510 (V) * 1 12/24 *
n29 Minimum frequency (Fmin) 0.5 - 10.0 (Hz) 0.1 1.5
n30 Minimum voltage (Vmin) 1 - 50/100 (V) * 1 12/24 *
n31 Motor rated current 0.0 - 25.5 (A) 0.1 See 40
Note 1
n32 Electronic thermal motor protection 0 - 4 1 0 40
n33 Stall prevention during deceleration 0, 1 1 0 42
n34 Stall prevention level during 30 - 200 (%) 1 170 42
acceleration
n35 Stall prevention level at set speed 30 - 200 (%) 1 160 43
n36 Momentary power loss function 0 - 2 1 0 43
selection
n37 Carrier frequency 1 - 6 1 4 44
(x 2.5 kHz)
n38 Automatic torque boost gain 0.0 - 3.0 0.1 1.0 44
n39
Frequency command gain 0.10 - 2.00 0.01 1.00 45
n40 Frequency command bias –99 - 99 (%) 1 0
n41 Frequency command upper limit 0 - 110 (%) 1 100 45
n42 Frequency command lower limit 0 - 110 (%) 1 0
n43 Control circuit terminal FR function 0, 1 1 0 46
n44 Analog monitor selection 0, 1 1 0 46
n45 Analog monitor gain 0.00 - 2.00 0.01 1.00
* Where two values are given (xx/xx) in Setting Range and Factory Setting, the first is
for 115V or 230V drives, and the second is for 460V drives.
21
for more: efesotomasyon - Yaskawa drive