R e c h a r g e a b l e F l a s h l i g h t
MR Rev.1 8/03
13
421-000-438
STEP 17
Push hard on the black plastic portion of the
SWITCH (12) and it should click into place
with the push button centered in the switch
hole of the HOUSING (9).
STEP 18
Slide the HEAD (14) over the SWITCH
HOUSING (9), make sure it slides over the
O-RING (10).
STEP 16
Make sure the SWITCH (12) is seated evenly
in the SWITCH HOUSING (9). Do not press on
the black plastic portion of the SWITCH (12)
until you are certain it is seated properly.
STEP 19
Screw the CHARGER MODULE (15)
(clockwise) into the SWITCH HOUSING
(9), finger tight.
