R e c h a r g e a b l e F l a s h l i g h t
MR Rev.1 8/03
15
421-000-438
STEP 25
Push the head down and replace the LAMP
(11) by lining up the pins of the LAMP (11)
with the two holes in the switch receptacle
and apply a straight downward pressure.
STEP 26
Replace the SWITCH SEAL (7) by bowing it
slightly with the thumb and index finger to
get it started into the hole in the BARREL
(16). Push all outside edges of the SEAL (7)
into the BARREL (16) hole.
STEP 24
Remove the flashlight from the barrel
holder tool.
STEP 27
Replace the BATTERY PACK (22) be sure
you insert the positive (button end) into
the light first. replace the TAIL CAP
ASSEMBLY (21), make sure you put
lubrication on all o-rings and threads.
CAUTION:
This bulb is pressurized and CAN SHATTER OR EXPLODE,
causing PERSONAL INJURY.
Wear protective eyeglasses
and clothing
when handling; never exceed rated voltage (6.0 VDC); never scratch
bulb’s glass envelope; never splash bulb with liquids. Bulb BURNS
VERY HOT and CAN CAUSE BURN INJURY OR HEAT OR FIRE DAMAGE.
Remove battery pack and let bulb cool before handling; avoid operating
near materials that are flammable or prone to heat or drying damage.
Dispose of lamp with care.
