R e c h a r g e a b l e F l a s h l i g h t
MR Rev.1 8/03
21
421-000-438
CIRCUIT BOARD
METER READING
Should be between 0.20 and
0.24 Amps.
ADDITIONAL CHARGER TESTS
Short the pins out using one of the tester
probes, paper clip etc. If the CIRCUIT BOARD
(3) is good the LED will light.
CIRCUIT BOARD
LEAD REPLACEMENT
1. Red lead on the front pin or pin closest to
head portion of charger.
2. Black lead on the rear pin
Put the flashlight in the CHARGER (1)
with the CHARGER (1) plugged in, the
LED will light if the BOARD is good.
