R e c h a r g e a b l e F l a s h l i g h t
MR Rev.1 8/03
11
421-000-438
Before replacing the plastic insulator note
the lip on one side of the insulator ring.
The lip on the insulator ring goes against the
silver ring so that the flat side will be facing
out. It will snap into place.
When replacing the ring onto the MODULE
(15) place the ring over the diode pin, push
down and snap the ring in place.
STEP 13
Push the HEAD (14) down and over the
O-RING (10) and remove it from the SWITCH
HOUSING (9).
