R e c h a r g e a b l e F l a s h l i g h t
MR Rev.1 8/03
421-000-438
10
After you have removed the silver ring and
insulator ring you will see the flat surface
where the rings had been.
Try to unscrew the MODULE (15) without
damaging the flat surface or the threads. Use
a pair of pliers and a rubber band, grip the
flat surface as gently as possible and
unscrew the MODULE (15)
(counterclockwise).
PROBLEM (cont.)
Separate the silver ring and black insulator
from the MODULE (15) by inserting your
finger nail or a knife blade between the ring
and the second insulator. The ring is held in
place by the spring loaded diode shown
next to the top thumb.
The diode shown in the picture is attached to a
spring and insulated by a plastic sleeve. In this
picture the sleeve is not shown and is still in
the diode hole of the MODULE (15).
Occasionally the diode might fall out when you
are unscrewing the MODULE (15), note how it
goes back into the hole and MAKE SURE THE
PLASTIC SLEEVE IS IN PLACE. A severe SHORT
will occur if the sleeve is missing.
