R e c h a r g e a b l e F l a s h l i g h t
MR Rev.1 8/03
421-000-438
12
FIGURE 1
REPLACEMENT SWITCH
The Replacement SWITCH (12) should come
with the internal mechanism partially out of
the housing, the push button will be down
and held in place by the housing so that the
SWITCH (12) can easily fit into the SWITCH
HOUSING (9).
STEP 15
REPLACE SWITCH
Insert the SWITCH ASSEMBLY (12) into
the rear of the SWITCH HOUSING (9).
FIGURE 2
If the push button is up, use a ball point pen
or pencil and: Push the button down and at
the same time push the entire mechanism
out the back of the housing.
When you remove the pen the button
should be locked under the housing as
shown in figure 1.
STEP 14
Depress the switch button on the SWITCH
(12) and at the same time push the SWITCH
ASSEMBLY (12) out the back of the SWITCH
HOUSING (9).
