R e c h a r g e a b l e F l a s h l i g h t
MR Rev.1 8/03
421-000-438
16
STEP 29
Hold the REFLECTOR (6) down with your
thumb as you hold the HEAD (14) with your
fingers as shown. This allows you to hold
the REFLECTOR (6) down and turn the HEAD
(14) for adjustment.
STEP 30
Using a pencil eraser and with the light OFF,
center the LAMP) (11) in the REFLECTOR (6)
hole. DO NOT TOUCH THE REFLECTORS
SURFACE or TRY TO CLEAN IT WITH
ANYTHING.
STEP 28
BULB ALIGNMENT
Before replacing the FACE CAP ASSEMBLY
(5) check for proper bulb alignment.
Using a test REFLECTOR (6) place it into the
head as shown.
STEP 31
While still holding the REFLECTOR (6) in the
HEAD (14) turn on the light, put it in spot
mode and observe the spot pattern. If the
LAMP (11) is aligned properly you should see
a dark “V” shape on each side of the spot.
(This is with all LAMPS after January 2002).
