R e c h a r g e a b l e F l a s h l i g h t
MR Rev.1 8/03
7
421-000-438
STEP 8
Unscrew BARREL (16) counterclockwise.
STEP 7
Push the plunger into the barrel switch hole.
STEP 5
Remove the LAMP (11) by pulling straight
up until the pins are clear of the receptacle.
*Note: It is easier to change the LAMP (11) if
you push the HEAD (14) down over the
SWITCH HOUSING (9).
CAUTION:
This bulb is pressurized and CAN SHATTER OR EXPLODE,
causing PERSONAL INJURY.
Wear protective eyeglasses
and clothing
when handling; never exceed rated voltage (6.0 VDC); never scratch
bulb’s glass envelope; never splash bulb with liquids. Bulb BURNS
VERY HOT and CAN CAUSE BURN INJURY OR HEAT OR FIRE DAMAGE.
Remove battery pack and let bulb cool before handling; avoid operating
near materials that are flammable or prone to heat or drying damage.
Dispose of lamp with care.
STEP 6
Lift up the plunger of the barrel holder and
insert the flashlight, BARREL (16), first into
the front of the barrel tool holder, lining the
switch hole up with the plunger.
