background image

Floodlight Range Installation Guide 

Zone 1 variant CML13ATEX3007 or IEC Ex CML14.0001 or CML 21UKEX3099 

      

Zone 2 variant CML17ATEX4231 or IEC Ex CML 17.0135 or CML 21UKEX4106

This installation guide provides instructions for installing the RF series of 

explosion protected floodlights. 

Text in 

Bold

 is specific for emergency variants

Overview 

1

 

Safety Instructions 

2

 Installation 

3

 Maintenance 

4

 

Technical  Specification 

5

 

Trouble Shooting

Important information

The RF series of explosion protected floodlights are specialist devices, certified for use 

in specific operating environments. 

The units must be installed in accordance with these instructions, must be correctly 

certified for the specific operating environment and must be installed by suitably 

qualified personnel.

 

Emergency floodlights will require the fuse to be reconnected upon installation 

and the floodlight subjected to three 24 hour charge/discharge cycles to bring 

the battery up to peak capacity.

 

If you have any queries about the installation or the certification of the unit – please 

contact Nemalux for immediate assistance and advice.

R

F

 

Series

rev. A-

2

1

1

-

1

2

www.nemalux.com  |   [email protected]  |   Tel 403•242•7475  |   Fax 403•243•6190 

SUBJECT TO CHANGE WITHOUT NOTICE

MADE IN 

UK

Содержание RF Series













Отзывы: