RF 48
2. The RF floodlight and the mounting bracket is supplied together as a unit.
The bolts in the side of the housing shall be removed and used to secure the
bracket to the RF housing, the bracket can be attached in the top or bottom
position depending on the mounting application, where possible the cable glands
should be kept to the bottom of the floodlight. It is very important that the red
fibre washers are fitted between the RF housing and the mounting bracket. The
unit must be aligned first before securing the bracket, and bolts tightened to
15Nm. On RF 24 and 48 units a locking screw is provided to lock the luminaire at
various angles, which should be tightened to 4Nm. The unit can be mounted
horizontally or vertically allowing the unit to point up/down or left/right.
4
-
12
www.nemalux.com | [email protected] | Tel 403•242•7475 | Fax 403•243•6190
SUBJECT TO CHANGE WITHOUT NOTICE
MADE IN
UK
