LXNAV LX80xx Скачать руководство пользователя страница 65

Страница: 65 / 192

Operating Modes

Version 6.03, May 2017

Page 65 of 192

5.1.7.2

Voice*

Voice module is integrated part of V5, V9 or V80 variometer. The voice module is 100%

controlled through the main display unit via the settings described in this menu.

In the

Voice

menu volume level (loudness) of the voice module can be adjusted. In the

Messages window each item can be set separately. Only checked items will be played by

the voice module.

Mixed item is visible only for variometer before V5 variometer, where it was not

possible to separately set volume for voice messages. It is highly recommended
to upgrade variometer to newer one. Please contact

[email protected]

for more

details.

Volume level (loudness) can be also set with volume rotary knob, when messages

are being played

5.1.7.3

Alarms*

The vario unit produces an audio alarm on reaching certain confirmation points. This screen

allows the parameters of the audio to be configured. If a particular message item is

checked the main display unit will generate an alarm at the time of event.

Frequency

and

Periods

define the length and pitch of alarm. Press

DEMO

button to play

alarm sound. Change volume to define loudness of alarm.

Содержание LX80xx

































































































































































































Результаты поиска

Содержание LX80xx

Отзывы:

LXNAV LX80xx, Руководство пользователя, Страница: 65 / 192

Результаты поиска

Содержание LX80xx

Отзывы: