manualshive.com logo in svg

Lutron Electronics LCP128, Руководство по установке и обслуживанию, Страница: 59 / 72

Поделиться
Скачать
Lutron Electronics LCP128 Скачать руководство пользователя страница 59

R

LCP128

TM

Setup and Maintenance Guide    

59

Symptom

Likely Cause

Action(s) for Remedy

RS232 commands do
not work.

(a) Baud rate is wrong.

(a) Check that the baud rate switches on the OMX-RS232

are correct.  The baud rate on the OMX-RS232 must
match the baud rate of the sending device.

(b) See ‘Control station

buttons do not work’
Symptom of this
troubleshooting
section.

OMX-CCO-8 is not
working.

(a) Option switch on the

OMX-CCO-8 is not set
correctly.

(a) All Option switches should be in the ON position.

(b) See ‘Control station

buttons do not work’
Symptom of this
troubleshooting
section.

OMX-AV outputs are
not working.

(a) DIP switch 8 on OMX-

AV is not set correctly.

(a) Set DIP switch 8 to ON.  This sets the unit to handle

maintained or momentary closures.

(b) No external power

supply on the outputs.

(b) The OMX-AV requires the outputs to be powered by an

external power supply (30VDC max).

(c) See ‘Control station

buttons do not work’
Symptom of this
troubleshooting
section.

Password is unknown.

(a) Contact Lutron Technical Support to unlock the controller.

Lutron contact information may be found at the end of
this guide.

Troubleshooting Guide
(continued)

Содержание LCP128









































































Отзывы:

Нет отзывов