R
38
LCP128
TM
Setup and Maintenance Guide
STEP 5 (continued)
Adding Weekly Events
(continued)
If Selecting a Scene Action
G
. In step F, if you selected
Scene
,
use and to
select the desired scene and press
or
(Done).
To add another event to this same schedule, select
Yes
when prompted “Modify More Events?”
OK
Select Scene
Previous
Done
G.
If Selecting an Afterhours Start Action
G
. In step F, if you selected
After Hours Start
, choose
Select Scene
or
Set Circuit Level
. Then press
or (Next).
H
. Select the scene or set the circuit levels to be used
for afterhours mode. Then press
or
(Done).
Refer to the beginning of STEP 5 for a detailed
description of how afterhours mode works.
To add another event to this same schedule, select
Yes
when prompted “Modify More Events?”
Note:
You will set the afterhours warn time, flash
count, and off delay later in STEP 5.
OK
OK
If Adding a Custom Scene Action
G
. In step F, if you selected
Custom Scene
, set the
circuit settings for the custom scene. Then press
or (Done).
To add another event to this same schedule, select
Yes
when prompted “Modify More Events?”
OK
Select Circuits
All Circuits
- - - -
001
Dim
- 10%
002
Dim
- 20%
003
Relay
- O N
Previous
Done
G.
Scene:
03
Afterhours Setup
Select Scene
Set Circuit Levels
Previous
Next
G.