R
26
LCP128
TM
Setup and Maintenance Guide
STEP 2 (continued)
Daylight Savings Time
Use this feature to set whether or not your location
uses daylight savings time. If it does, you can
configure when it starts and ends. When daylight
savings time is used, the time will change
automatically.
A.
From the
Setup Clock
menu
use and to
highlight
Daylight Saving Time
and press
or
(OK).
B.
Use
and
to set whether or not your location
uses daylight savings time, then press
or
(Next).
C.
If your location follows the
United States
rules for
daylight savings time (Starts on the 1st Sunday in
April, ends on the last Sunday in October at 2 AM,
offset by 1 hour) then select United States.
Otherwise select
Other
. Press
or
(Done) to
save changes.
D.
If you select
Other
, you are prompted to enter the
rules. The default rules are set based on your
location. You will need to know:
• The start month, week, and day.
• The end month, week, and day.
• The number of minutes to adjust for daylight
savings time, up to 120 minutes.
OK
OK
OK
Daylight Savings
Does this location
use daylight savings?
Yes
Cancel
Next
Daylight Savings
Current Setting
United States
Previous
Done
B.
C.
Setup Clock
Date
Location
Time
Daylight Saving Time
Back
OK
A.