Lutron Electronics LCP128, Руководство по установке и обслуживанию, Страница: 32 / 72

R
32 LCP128
TM
Setup and Maintenance Guide
STEP 4 (continued)
Configure the Wallstations
(continued)
If Selecting a Delay to Off Action
H. In step G, if you selected Delay to Off , use and
to set the Time to Off and press or .
I. The Assign Circuits screen lists all the circuits.
Unassigned circuit numbers have hash lines going
through them. Move the cursor to a circuit number
and press
to toggle between Assigned and
Unassigned (dashed). All circuits can be toggled
by selecting ALL Circuits and pressing . When
the circuits are programmed press .
J. For dimming circuits affected by the action, use
and
to set the Fade Time and press or .
K. For a combination of dimming and switching
circuits, use
and to set when the switches
react ( Start of Fade or End of Fade ). Then press
or .
OK
OK
OK
OK
OK
Set Delay Time
Time to Off: 10 min
Previous Next
H.
Assign Circuits
PRESS OK TO SELECT CIRCUIT
A L L C i r c u i t s
0 0 1 0 0 2 0 0 3 0 0 4
0 0 5 0 0 6 0 0 7 0 0 8
Previous Done
I.
If Selecting a Lower Circuits, Raise
Circuits, or Toggle Action
H. In step G, if you selected Lower Circuits , Raise
Circuits , or Toggle , the Assign Circuits screen lists
all the circuits. Unassigned circuits are presented as
numbers with hash lines going through them.
Move the cursor to a circuit number and press
to
toggle between Assigned and Unassigned
(dashed). All circuits can be toggled by selecting
ALL Circuits and pressing . When the circuits
are programmed press .
I. For dimming circuits affected by the action, use
and
to set the Fade Time .
J. For a combination of dimming and switching
circuits, use
and to set when the switches
react ( Start of Fade or End of Fade ). Then press
or .
OK
OK
OK
Assign Circuits
PRESS OK TO SELECT CIRCUIT
A L L C i r c u i t s
0 0 1 0 0 2 0 0 3 0 0 4
0 0 5 0 0 6 0 0 7 0 0 8
Previous Done
001
H.
001