R
30
LCP128
TM
Setup and Maintenance Guide
STEP 4 (continued)
Configure the Wallstations
A.
From the
Main Menu
use and to
highlight
Control Station Setup
and
press or (OK).
B.
Use and to
choose
the
Address
of the
wallstation you would like to configure and press
or (Next).
Note:
The wallstation Address selected must
match the Address switch setting on the
wallstation.
C.
Use and to
set
the
Type
to
Wall Station
and
press or (Next).
D.
Use
and
to select whether the station has
Permanent Raise and Lower Buttons
and press
or (Next).
E.
Use and to
set
the
Number
of buttons and
press or (Next).
Note:
Do not count raise/lower buttons.
F.
Use and to
select
the
Button
you want to
program and press
or
(Next).
G.
Use
and
to select the type of
Action
for this
button:
Lower Circuits, Raise Circuits, Scene,
Custom Scene, Enable Time Clock, Disable
Time Clock, Delay to Off, Toggle,
or
No Action
and
press or (Next).
Refer to the following pages to program each type
of action.
OK
OK
OK
OK
OK
OK
OK
Control Station Setup
Address 01
Address 02
Address 03
Address 04
Cancel
Next
Address 03 Setup
Number of Buttons:
Previous
Next
03
Address 01 Setup
Button 01
Button 02
Button 03
Previous
Next
B.
E.
F.
Address 03 Button 01
Action:
Previous
Next
Lower Circuits
G.
Address 03 Setup
Type:
Previous
Next
Wall Station
C.