R
44
LCP128
TM
Setup and Maintenance Guide
STEP 6 (continued)
Configure Contact Closure
Inputs (continued)
If Selecting a Scene Action
E.
In step D, if you selected
Scene
,
use and to
select the scene and press
or
(Done).
OK
Select CCO Address
A01 CCO1 - Maintained Open
A01 CCO2 - ---
A01 CCO3 - ---
A01 CCO4 - ---
Previous
Done
F.
Custom Scene Fade Time
Fade Time:
20 sec
Previous
Next
G.
Custom Scene Fade Time
When do
switches react?
Start of Fade
Previous
Done
H.
Select Scene
Scene:
05
Previous
Done
E.
If Selecting a Custom Scene Action
E.
In step D, if you selected
Custom Scene
, the
Select Circuits screen lists all the circuits. Use
and
to select a circuit and
and
to change
the setting for that circuit. Or to simultaneously
change all circuits, select
All Circuits
and use
and
to change the setting.
Note:
The
All Circuits
function enables you to
simultaneously adjust the percentage for all
dimming circuits or to turn all circuits off or on.
Circuit settings depend on the circuit type:
Switching:
ON, OFF, --- (unaffected)
Dimming:
OFF, 1 - 100%, --- (unaffected)
Motors:
Raise, Lower, Stop, Jog Up, Jog Down
Fans:
Low, Medium, Medium-High, High
Note:
The
---
(unaffected) setting means the
circuit is not affected by this scene.
When the circuits are programmed for this custom
scene
press or (Next).
F.
The Select CCO Address screen is displayed only if
control station devices with contact closure outputs
(OMX-AV or OMX-CCO-8) have been entered into
the system.
Use
and
to select the output to be associated
with the scene being programmed. Use
and
to change the setting for that output:
maintained
open
,
maintained close, momentary pulse
, or
---
(unaffected). When the outputs are
programmed for this custom scene, press
or
(Done).
G.
For dimming circuits affected by the custom scene,
use and to
set
the
Fade Time
and press
or .
H.
For a combination of dimming and switching
circuits, use
and
to set when the switches
react (
Start of Fade
or
End of Fade
). Then press
or .
OK
OK
OK
OK
Select Circuits
All Circuits
- - - -
001
Dim
- 10%
002
Dim
- 20%
003
Relay
- O N
Previous
Next
E.
Address
number
Contact closure
output number