R
28
LCP128
TM
Setup and Maintenance Guide
STEP 3 (continued)
Modify Scenes
A.
From the
Main Menu
use and to
highlight
Scene Setup
and
press or (OK).
B.
The Scene Modification screen lists the
preconfigured scenes stored in your system. Use
and
to choose the scene you want to modify
and
press or (Next).
C.
The system lists each circuit and its current setting
for this scene. Use
and
to select a circuit and
and
to change the setting for that circuit. To
simultaneously change all circuits, select
All
Circuits
and use
and
to change the setting.
Note:
The
All Circuits
function enables you to
simultaneously adjust the percentage for all
dimming circuits or to turn all circuits off or on.
Scene circuit settings depend on the circuit type:
Switching:
ON, OFF, --- (unaffected)
Dimming:
OFF, 1 - 100%, --- (unaffected)
Motors:
Open, Close, Stop, Jog Up, Jog Down,
--- (unaffected)
Fans:
Low, Medium, Medium-High, High,
--- (unaffected)
Note:
The
--- (unaffected)
setting means that the
circuit is not affected by this scene.
When you are finished modifying the scene press
or (Next).
D.
The Select CCO Address screen is displayed only if
control station devices with contact closure outputs
(OMX-AV or OMX-CCO-8) have been entered into
the system (see STEP 4).
Use
and
to select the output to be associated
with the scene being programmed. The letter “A”
followed by a two digit number at the beginning of
each line refers to the the address of the device.
Use
and
to change the setting for that output:
maintained open
,
maintained close, momentary
pulse
, or
---
(unaffected).
When the outputs are programmed press
or
(Done).
Example:
A01 CCO2 is address1 contact closure
output 2.
E.
For dimming circuits affected by the scene, use
and
to set a fade time and press
or
(Next).
F.
For a combination of dimming and switching
circuits, use
and
to set whether switches
react at
Start of Fade
or
End of Fade
. Then press
or (Done).
OK
OK
OK
OK
OK
OK
Scene Modification
Off Scene
Scene 01
Scene 02
Scene 03
Cancel
Next
B.
Scene 02
All Circuits
-
001
Dim
- 50%
002
Dim
- 75%
003
Relay
- O N
Previous
Next
C.
Select CCO Address
A01 CCO1 -Maintained Open
A01 CCO2 - ---
A01 CCO3 - ---
A01 CCO4 - ---
Previous
Next
D.
Scene 02 Fade Time
Fade Time:
20 sec
Previous
Next
E.
Scene 02 Switches
When do
switches react?
Start of Fade
Previous
Done
F.