R
LCP128
TM
Setup and Maintenance Guide
53
Panel Setup
Emergency Setup
Afterhours Setup
Choose Language
Password Protection
Back
OK
Locking and Unlocking the Controller
Overview
The
LCP128
controller may be password protected to prevent unauthorized access to system settings. If no
controller buttons are pressed during a user-set time (1-90 minutes), the controller locks automatically. A 4-digit
password must be set when locking is configured. This password must be entered before any of the menus
can be accessed when the controller is locked. This password must also be entered to change the lockout
settings.
Setting the Controller to Lock
A.
From the
Main Menu
use and to
highlight
Panel Setup
and
press or (OK).
B.
Use and to
highlight
Password Protection
and
press or (OK).
C.
Use and to
select
either
Change Password
or
Set Lockout Time
and
press or (OK).
D.
If
Set Lockout Time
is selected, use
and
to
set the time of inactivity (no button presses on the
controller) to wait before locking and press
or
(Next). If you do not want the controller to lock,
select
Do Not Lock
.
E.
If
Change Password
is selected, enter the
password you would like to set (default is 0 0 0 0).
Use
and
to select the digit to change, and
then
and
to change each value. When you
have entered the password press
or
(Next).
Then re-enter the new password for confirmation
and
press or (Done)
The controller will now lock after the set amount of
time.
Note:
If you forget the password, contact Lutron
Technical Support at 1 (800) 523-9466 to unlock
the controller.
OK
OK
OK
OK
OK
OK
Change Password
Enter New Password
0 0 0 0
Previous
Next
Set Lockout Time
Time to wait before
locking the screen:
5 mins
Cancel
Done
Change Password
Re-Enter New Password
0 0 0 0
Previous
Done
0
0
B.
D.
E.