If...
Then...
1.0
Initial software download via FTAM
and FTTD is not supported. Proceed to
•
“Procedure 6-3.7: Initial software
generic installation via FTP (1.0
boot code)” (6-114)
(preferred)
•
Using the serial port to
install/download software takes
significantly longer than using a
LAN port.
............................................................................................................................................................
12
To verify that you can log into the NE, connect the cross-over LAN
cable from the PC’s Network Interface Card (NIC) to the
LAN
port
and establish a WaveStar
®
CIT session.
Reference:
“Procedure 6-2: Connect personal computer (PC)
............................................................................................................................................................
13
Specifying OSI in the
Connection Type:
field, log in to the shelf.
Important! Regardless of the SYSCTL boot code, your TID,
user ID, and password are no longer default.
ALL user-provisioned parameters (except circuit IDs) are restored
from the OC-N Main OLIUs after the software applied and the
shelf reset. Log in to the shelf using your original user ID and
password.
Procedure 6-3: Replace a SYSCTL
(VLNC1) circuit pack
Supporting procedures
....................................................................................................................................................................................................................................
365-372-333 R2.1
Issue 4, June 2005
Lucent Technologies
6 - 4 5