............................................................................................................................................................
4
Define the FTAM-FTP Gateway in
one
of the following ways:
•
If the TID of the FTAM-FTP Gateway has been previously
defined, select it from the
TID
pull-down menu.
OR
•
If the gateway NE and the remote NE are in the same OSI area:
1.
Enter the TID of the FTAM-FTP Gateway in the
TID
field
and click
Get NSAP
. (If any fields on this screen are
populated, click
Clear
before you enter the TID.)
2.
Click
Add
and then
Save
. The TID is added to the
pull-down menu for this CIT and you should never need to
re-enter the NSAP address for this gateway NE’s TID.
OR
•
If the gateway NE and the remote NE are not in the same OSI
area:
1.
In the
FTTD
panel, select
_template_
from the
TID:
pull-down menu. This will pre-populate most of the fields
on this form (required value for
Psel
is 02,
Ssel
is 5353,
and
Tsel
is 5454).
2.
Click
Modify
.
3.
Replace
_template_
with the TID of the FTAM-FTP
gateway NE.
4.
Edit the NSAP Address fields as required. Refer to
“Procedure 6-9: Backup and restore NE database via FTTD”
(6-177)
5.
Verify that the Selector (
Sel:
) field is “1d”.
6.
Click
Add
and then
Save
. The TID has been added to the
pull-down menu for this CIT and you should never need to
re-enter the NSAP address for this gateway NE’s TID.
............................................................................................................................................................
5
Select the
FTP
tab.
Procedure 6-9.2: Provision automatic
database backup schedule via FTTD
Supporting procedures
....................................................................................................................................................................................................................................
6 - 1 8 4
Lucent Technologies
365-372-333 R2.1
Issue 4, June 2005