............................................................................................................................................................
5
From the System View, click the
Alarm List
button and click
Refresh
.
............................................................................................................................................................
6
Is the
illegal CP type
alarm still present?
If...
Then...
Yes
Continue with
No
Proceed to
............................................................................................................................................................
7
From the System View menu, select
Reports
→
Equipment Lists
→
Pack
, highlight Shelf, and click
Select
.
Result:
The Circuit Pack List appears. Print or Save this
list.
............................................................................................................................................................
8
Verify that the circuit pack in question is supported by the current
software generic. If not supported, remove the circuit pack. If desired,
replace the circuit pack with a supported circuit pack.
............................................................................................................................................................
9
From the System View menu, select
Configuration
→
Update
System
→
Update All
.
Result:
A dialog box appears asking you to confirm
executing this command. Click
Yes
.
............................................................................................................................................................
10
From the System View, click the
Alarm List
button and click
Refresh
.
............................................................................................................................................................
11
Is the
illegal CP type
alarm still present?
If...
Then...
Yes
Contact your next level of support.
No
Continue with
Procedure 5-22: Clear
″
illegal CP type
″
alarm
Trouble clearing procedures
....................................................................................................................................................................................................................................
5 - 6 6
Lucent Technologies
365-372-333 R2.1
Issue 4, June 2005