............................................................................................................................................................
4
Select a connection profile from the
Profile
pull-down menu and then
proceed to
. OR Enter information for a new profile as follows:
1.
In the
Server
panel, select
IP
and enter the address of the FTP
server. (If the WaveStar
®
CIT is the FTP server, you can
determine its IP address by entering
ipconfig
from the
MS DOS
prompt on your PC.)
2.
If necessary, enter the
port
(default is blank). Defining the port is
not required for the backup to execute successfully. However, a
value of 21 is valid if entered.
3.
In the
User
panel, enter the user name and password for the FTP
server. (If you are using the WaveStar
®
CIT as your FTP server,
the default user name/password for the WaveStar
®
CIT is
LUC01
/
LUC+01
, however your user name/password may be
different.)
............................................................................................................................................................
5
If you entered connection information in
(rather than selected
an established profile), you should assign a new profile name to this
information to allow Automatic Backup to store the FTP login
password. To do this:
1.
Enter a new name in the
Profile
menu.
2.
Click
Add
to add the profile to the list.
3.
Click
Save
to save the list.
Entries to the
Profile
pull-down menu may be changed using the
Modify
,
Apply
, and Save buttons or removed using the
Delete
button.
............................................................................................................................................................
6
In the
File Path:
field, enter
backups/<filename>
if you wish to
save the backup file to the default location. (If the WaveStar
®
CIT is
the FTP server, a maximum of 80 characters is suggested for this
field.)
You may also click the
Browse
button next to the Path: field to
browse to any directory on your PC and over-write the default entry.
The
Browse
button is not available (greyed out) if the FTP server is
not the local WaveStar
®
CIT.
Important! The value of the Path field can be either an absolute
path or a relative path that is relative to the FTP server root
directory. The absolute path must start with the drive name
Procedure 6-8.2: Provision automatic
database backup schedule via FTP
Supporting procedures
....................................................................................................................................................................................................................................
6 - 1 7 0
Lucent Technologies
365-372-333 R2.1
Issue 4, June 2005
