Before you begin
Prior to performing this procedure:
1.
Refer to
in this chapter and
“Electrostatic discharge” (1-13)
in
2.
Refer to the Metropolis
®
DMXplore Access Multiplexer Software
Release Description for the software being installed for a
description of any special considerations required when installing
this version of the software.
Procedure
Complete the following steps to copy the software generic from a
source Metropolis
®
DMXplore shelf to a supported remote NE.
............................................................................................................................................................
1
Establish a WaveStar
®
CIT session and log in to the
source
shelf
(the shelf with the desired generic in the dormant area).
Reference:
“Procedure 6-2: Connect personal computer (PC)
............................................................................................................................................................
2
From the System View menu, select
Configuration
→
Software
→
Copy Software
.
Result:
The Copy Software window opens.
............................................................................................................................................................
3
In the
Destination TID:
field, enter the TID of the remote NE to
which you wish to copy the NE Generic Software and click
OK
.
Important! During the remote copy, the destination shelf
produces the remote install/copy program IP Standing Condition
(SC) autonomous message.
The source shelf produces the copy program IP Standing
Condition (SC) autonomous message.
If logged in to the NE, each condition is visible in the alarm list
(click
Alarm List
from the System View) and the NE History log
(select
Reports
→
NE History Log
from the System View).
If your destination NE is equipped with a factory-fresh SYSCTL,
you will not be able to log in to the shelf prior to the completion
of
cpy-prgm
and the automatic apply. Therefore, you will not see
the
remote install/copy program IP
condition in this
scenario.
Procedure 6-7: Software generic copy and
upgrade to a remote shelf
Supporting procedures
....................................................................................................................................................................................................................................
6 - 1 6 2
Lucent Technologies
365-372-333 R2.1
Issue 4, June 2005