and the Status: Active. Older sessions are identified by a red X
and the Status: Disconnect.
............................................................................................................................................................
2
Identify the ID for the Active session and click on the corresponding
IDx tab to view the transmission progress. When the transmission is
complete, the Status for that ID changes to Disconnect. Click
Close
when finished.
Important! If the FTP server fails to start, it could mean that
another program using an FTP server is already running.
Depending on what operating system you are using, you must go
to the device file and disable the FTP server. Refer to
6-12: Disable an FTP server” (6-199)
for instructions for each
allowed operating system.
E
N D
O F
S
T E P S
..............................................................................................................................................................................
Procedure 6-11: Observe FTP progress
Supporting procedures
....................................................................................................................................................................................................................................
6 - 1 9 8
Lucent Technologies
365-372-333 R2.1
Issue 4, June 2005