............................................................................................................................................................
10
Do the actual (operational) duplex mode and line rate match on both
the local LAN port and the interfacing customer LAN port?
If...
Then...
Yes
Proceed to
No
Continue with
............................................................................................................................................................
11
From the System View select
Configuration
→
Equipment
, expand
the required circuit pack, highlight the desired port, and click
Select
.
Then click the Port Data tab.
Result:
The port parameters appear.
............................................................................................................................................................
12
Provision the Provisioned Duplex Mode and/or Line Rate parameters
as required to match the interfacing customer LAN port and click
Apply
.
Result:
A warning message appears asking you to confirm
executing this command. Click
Yes
.
............................................................................................................................................................
13
Does the actual (operational) flow control modes match on both the
local LAN port and the interfacing customer LAN port?
If...
Then...
Yes
Proceed to
No
Continue with
............................................................................................................................................................
14
From the System View, select
Configuration
→
Equipment
, expand
the required circuit pack, highlight the desired port and click
Select
.
Then click the Flow Control tab.
Result:
The flow control parameters appear.
............................................................................................................................................................
15
Provision the Flow Control Mode parameter as required to match the
interfacing customer LAN port and click
Apply
.
Procedure 5-27: Clear
″
inc. FE-LAN ANM
″
alarm
Trouble clearing procedures
....................................................................................................................................................................................................................................
365-372-333 R2.1
Issue 4, June 2005
Lucent Technologies
5 - 8 3