Lincoln Electric LECS-080-4400-00 Скачать руководство пользователя

Страница: 11 / 56

Torchmate 4000 Series

PUBLICATIONS

Refer to the most recent versions of the following standards for more information:

•

OSHA, SAFETY AND HEALTH STANDARDS, 29CFR 1910, obtainable from the Superintendent of

Documents, U.S. Government Printing Office, Washington, D.C.

•

ANSI Standard Z49.1, SAFETY IN WELDING AND CUTTING, obtainable from the American Welding

Society, 8669 NW 36 Street, #130; Miami, Florida 33166-6672

•

NIOSH, SAFETY AND HEALTH IN ARC WELDING AND GAS WELDING AND CUTTING, obtainable from

the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402

•

ANSI Standard Z87.1, SAFE PRACTICES FOR OCCUPATION AND EDUCATIONAL EYE AND FACE

PROTECTION, obtainable from American National Standards Institute, 1430 Broadway, New York, NY

10018

•

ANSI Standard Z49.2, FIRE PREVENTION IN THE USE OF CUTTING AND WELDING PROCESSES,

obtainable from American National Standards Institute, 1430 Broadway, New York, NY 10018

•

AWS Standard A6.0, WELDING AND CUTTING CONTAINERS WHICH HAVE HELD COMBUSTIBLES,

obtainable from American Welding Society, 8669 NW 36 Street, #130; Miami, Florida 33166-6672

•

NFPA Standard 51, OXYGEN-FUEL GAS SYSTEMS FOR WELDING, CUTTING AND ALLIED PROCESSES,

obtainable from the National Fire Protection Association, Batterymarch Park, Quincy, MA 02269

•

NFPA Standard 70, NATIONAL ELECTRICAL CODE, obtainable from the National Fire Protection

Association, Batterymarch Park, Quincy, MA 02269

•

NFPA Standard 51B, CUTTING AND WELDING PROCESSES, obtainable from the National Fire

Protection Association, Batterymarch Park, Quincy, MA 02269

•

CGA Pamphlet P-1, SAFE HANDLING OF COMPRESSED GASES IN CYLINDERS, obtainable from the

Compressed Gas Association, 1235 Jefferson Davis Highway, Suite 501, Arlington, VA 22202

•

CSA Standard W117.2, CODE FOR SAFETY IN WELDING AND CUTTING, obtainable from the Canadian

Standards Association, Standards Sales, 178 Rexdale Boulevard, Rexdale, Ontario, Canada M9W 1R3

•

NWSA booklet, WELDING SAFETY BIBLIOGRAPHY obtainable from the National Welding Supply

Association, 1900 Arch Street, Philadelphia, PA 19103

•

ANSI Standard Z88.2, PRACTICE FOR RESPIRATORY PROTECTION, obtainable from American

National Standards Institute, 1430 Broadway, New York, NY 10018

Содержание LECS-080-4400-00
























































Результаты поиска

Содержание LECS-080-4400-00

Отзывы:

Похожие инструкции для LECS-080-4400-00

Бренды по названию

Популярные бренды

Lincoln Electric LECS-080-4400-00, Руководство пользователя

Результаты поиска

Содержание LECS-080-4400-00

Отзывы:

Похожие инструкции для LECS-080-4400-00

Бренды по названию

Популярные бренды