Lincoln Electric LECS-080-4400-00 Скачать руководство пользователя | Manualshive

Страница: 41 / 56

background image

Torchmate 4000 Series

36

Maintenance

As with all machinery, there is required maintenance. This will cover Daily, Monthly, and ‘As Needed’ tasks to keep

your 4400/4800/4510 running like new.

Daily Maintenance:

Plasma Power Supply:

The plasma power supply and torch body will need to be evaluated between material thicknesses or prior to cutting.

Remove and check if the consumables need to be changed. Apply the following to know when the consumables

need to be changed:

For reference and complete maintenance on the FlexCut plasma power supplies, see your Owners Manual. For a

replacement manual, please call Torchmate technical support.

The nozzle

is the most frequently replaced consumable. A sign the nozzle needs to be

changed is an excessive amount of both dross and bevel angle appearing in your cuts.

On the nozzle itself, you’ll find that a larger orifice or an irregularly shaped hole will be

the telltale signs of excessive wear.

The shield cap:

hold it up to a light and check if any of the holes are plugged. If they

are then replace the shield. These holes are the outlet for the shield gas, and when

clogged, they can misshape the plasma arc which leads to imprecise cuts.

The retaining cap

is the most durable of the consumables, and will only need to be

replaced when corrosion, clogging, or cracking is physically apparent.

The swirl ring

will need to be checked intermittently for clogs or cracks.

The electrode:

pay close attention to the amount of Hafnium left in the tip. The

larger the crater within the electrode tip, the more wear that the electrode has

gone through. Replace the electrode if the center pit depth is greater than .06” (1.5

MM). Also, notice darker swirl marks near the tip of the electrode. Although these

swirl marks don’t have a correlation with the life of the electrode, they do indicate

contaminants within the air supply, such as excessive moisture or oil.

Please Note:

• When not in use, we recommend removing the consumables from the torch until next time the machine is in

use to help prevent corrosion building in the pins.

«
...
39
40
41
42
43
...
»

Содержание LECS-080-4400-00

























































Отзывы:

Нет отзывов

Похожие инструкции для LECS-080-4400-00

Бренд: Radio Shack Страницы: 52

Бренд: U-Line Страницы: 7

Бренд: Caen Страницы: 20

Бренд: Federal Signal Corporation Страницы: 79

Бренд: Federal Signal Corporation Страницы: 32

Бренд: Panamax Страницы: 16

Бренд: Jäger Страницы: 18

Бренд: tell Страницы: 11

ZoneSense Plus AS

Бренд: Halma Страницы: 58

PARTNER II Release 4.1

Бренд: Lucent Technologies Страницы: 363

Бренд: Victaulic Страницы: 2

Бренд: LEGRAND Страницы: 10

Бренд: Allen-Bradley Страницы: 8

Бренд: Sumner Страницы: 10

Бренд: VDH Страницы: 4

Бренд: VIRDI Страницы: 73

Бренд: Aurora Scientific Страницы: 21

Бренд: Clare Controls Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды