Lincoln Electric LECS-080-4400-00 Скачать руководство пользователя страница 54

Страница: 54 / 56

User Guide

Software Faults (Cont.):

Problem

Solution

Torch retracts fully to the top after sensing the

material in an ohmic sense, and the Run Job button

becomes available to click.

Clear the surface of the material of any corrosion that

would hinder the ohmic sensing process.

Verify the torch lead is not getting pulled tight on the

way down to the surface of the material.

Check for the torch pushing against the material

deflecting it before stopping and retracting.

Torch collides with the material after 1” of cut.

The torch is cutting too high from the material.

Verify Pierce and Cut height are at recommended

book values.

Verify the height control mode is set to Auto and not

Manual.

Verify the Sample Voltage function is turned ON.

Check for part tip-ups near the piercing points that

may interfere with the torch sensing the materials

height.

Torch does not appear to maintain a consistent cut

height with the material as it warps.

Verify the height control mode is set to Auto and not

Manual.

Verify the Sample Voltage function is turned ON.

If the part involves very complex geometry, the sys-

tem may be in a Lockout Mode for extended periods

of time.

Basic tab change the Distance to Corner value to .250.

Содержание LECS-080-4400-00
























































Результаты поиска

Содержание LECS-080-4400-00

Отзывы:

Бренды по названию

Популярные бренды

Lincoln Electric LECS-080-4400-00, Руководство пользователя

Результаты поиска

Содержание LECS-080-4400-00

Отзывы:

Бренды по названию

Популярные бренды