Installing a memory card
42
Installing and removing options
L
e
xm
ar
k Co
nf
id
en
ti
al
u
n
ti
l an
no
un
ced - Re
vi
si
on:
02
/18
/05
Installing a memory card
Complete the following instructions to install either a printer memory card or a flash memory card.
Memory cards must have 168-pin connectors.
Memory options designed for other
Lexmark
printers may not work with your printer.
The system board has three connectors for optional memory cards. You can install any combination
of printer memory and flash memory cards in the connectors. However, the printer only recognizes
one flash memory card at a time.
Warning:
Memory and flash memory cards are easily damaged by static electricity. Touch
something metal, such as the printer frame, before you touch a memory card.
1
Remove the system board access cover (see
2
Push open the latches on both ends of the memory connector you want to use.
3
Unpack the memory card.
Avoid touching the connection points along the edge of the card. Save the packaging.
4
Align the notches on the bottom of the card with the notches on the connector.
5
Push the memory card firmly into the connector until the latches on either end of the
connector snap into place.
It may require some force to fully seat the card.
6
Make sure each latch fits over the notch on each end of the card.
