Setting security using the Embedded Web Server (EWS)
144
Administrative Support
L
e
xm
ar
k Co
nf
id
en
ti
al
u
n
ti
l an
no
un
ced - Re
vi
si
on:
02
/18
/05
To enable and configure 802.1x on the Embedded Web Server after installing the required
certificates:
1
Open your Web browser. In the address line, enter the IP address of the printer you want to
configure using the format: http://ip_address/.
2
Click Configuration.
3
Under Other Settings, click Network/Ports.
4
Click 802.1x Authentication.
Note: If an optional internal wireless print server is installed, click Wireless instead of
802.1x Authentication.
Locking the operator panel menus
Operator Panel Menu Lockout lets you create a PIN number and choose specific menus to lock.
Each time a locked menu is selected, the user will be prompted to enter the correct PIN at the
operator panel. The PIN does not affect any access through the EWS. To lock operator panel menus:
1
Open your Web browser. In the address line, enter the IP address of the printer you want to
configure using the format: http://ip_address/.
2
Click Configuration.
3
Under Other Settings, click Security.
4
Click Menu Lockout Setup.
Printing Lockout
Printing Lockout lets you lock or unlock a printer using an assigned PIN. When locked, every job the
printer receives will buffer to the hard disk. A user can print jobs only by entering the correct PIN on
the operator panel. You can assign a PIN through the Web page of the device.
Note: This setting is only available when a hard disk is installed.
Note: Back channel data will be processed while the printer is locked. Reports such as
user or event logs can be retrieved from a locked printer.
To set Printing Lockout:
1
Open your Web browser. In the address line, enter the IP address of the printer you want to
configure using the format: http://ip_address/.
2
Click Configuration.
3
Under Other Settings, click Security.
