Lexmark 19Z0201 - X 862dte 4 B/W Laser, Руководство пользователя

Страница: 171 / 283

157
Chapter 8: Understanding printer messages
85 Coating Roll Life Warning This message indicates the coating roll is nearing its end of life or empty condition.
Normally the coating roll is replaced when you replace the black print cartridge. It
is possible, depending on the type of print jobs you send to the printer, a coating
roll may have to be replaced prior to the print cartridge becoming low on toner. If
you do not have an extra coating roll, order it now. See page 113 for more infor-
mation about ordering new supplies.
Press
Go
to clear the message and continue printing. The
Supplies
status
message is displayed with the Ready , Power Saver , Busy and Waiting
messages—unless another status message of higher priority is posted—until you
replace the coating roll.
Note: Continued use of the coating roll after the warning has been displayed may
result in poor toner adhesion to print media, other print quality problems, and
paper jams.
86 Transfer Belt Missing The transfer belt is not installed in the printer. Insert the transfer belt and close the
front cover to clear the message.
87 Fuser Exhausted This message indicates a new fuser kit must be installed. If you do not have the
fuser kit on hand, order it now. See page 113 for more information about ordering
new supplies.
Press
Go
to clear the message and continue printing. The Fuser Exhausted inter-
vention message is posted every time the printer power it turned on.
When a new fuser is installed, you must reset the fuser counter to zero. To reset
the fuser counter place the printer power off (O). Press and hold the
Select and
Return buttons on the operator panel while placing the printer power switch to on
(I). The Configuration Menu is displayed on the operator panel.
Press
Menu>
or
<Menu
until
Reset Fuser Count
appears on the second line. Press
Select
to reset the fuser counter to zero.
88 Color Low This message indicates the color print cartridge indicated is nearing its end of life
or empty condition. If you do not have an appropriate extra print cartridge, order it
now. See page 113 for more information about ordering new supplies.
Press Go to clear the message and continue printing. The Supplies status
message is displayed with the Ready , Power Saver , Busy and Waiting
messages—unless another status message of higher priority is posted—until you
replace the print cartridge.
88 Color Cartridge Empty The printer has detected the specified print cartridge is completely out of toner.
You must install a new print cartridge before you can continue printing. See
page 121 for more information.
20 x Paper Jam The printer has detected a paper jam in the area specified in the message.
You must remove the paper from the entire paper path. Then close any open
covers and press Go to clear the message. See page 168 or page 169 for
additional information on clearing a jam.
See page 104 for information about avoiding jams.
Attendance messages (continued)
Message Action