Lexmark 19Z0201 - X 862dte 4 B/W Laser, Руководство пользователя

Страница: 162 / 283

148
Chapter 8: Understanding printer messages
Waiting The printer has received a page of data to print but is waiting for an End of Job or
Form Feed command or for additional data.
• To print the contents of the print buffer, press Go.
• To cancel the print job, press
Menu>
or
<Menu
until the Job Menu is displayed.
Press Select . Press Menu> or <Menu until Cancel Job appears on the second
line. Press Select .
Not Ready The printer is not ready to receive or process data, because someone selected
Stop
when another message was displayed.
• Press
Go
to remove the printer from the Not Ready state.
• To cancel the print job, press Menu> or <Menu until the Job Menu is displayed.
Press
Select
. Press
Menu>
or
<Menu
until Cancel Job appears on the second
line. Press Select .
Ready Hex Hex Trace diagnostic mode is active, and the printer is ready to receive data. Use
Hex Trace to isolate the source of a print job problem. With Hex Trace selected, all
data sent to the printer is printed in hexadecimal and character representation.
Control code strings are printed, not executed.
To exit Hex Trace mode, turn the printer off or reset the printer. To reset the printer,
press
Menu>
or
<Menu
. When the Job Menu is displayed press
Select
. press
Menu>
or
<Menu
until Reset Printer appears on the second line. Press
Select
.
Locking Menus Someone has locked the menus. While the menus are locked, users cannot
change the printer default settings from the operator panel. See “Locking the
menus” on page 14 for more information.
Unlocking Menus Someone has unlocked the menus. Users can now change the printer default
settings from the operator panel. See “Locking the menus” on page 14 for more
information.
Disabled Menu Menus have been locked, or disabled. See page 14 for more information.
Enabled Menu Menus have been unlocked. See page 14 for more information.
Supplies At least one of the printer supplies needs attention. You may have a paper tray that
is low on paper or a print cartridge that needs replacing. Press
Menu>
or
<Menu
to
open the Supplies Menu. See page 17 for more information about the menu.
Activating Menu Changes This message is displayed when the printer is being reset. To activate some of the
printer settings, the printer must restart. No buttons are active when this message
is displayed.
Parallel The standard parallel interface is the active communication link.
Parallel
x
The specified parallel interface is the active communication link.
Serial x The specified serial interface is the active communication link.
Network x The specified network interface is the active communication link.
LocalTalk x The LocalTalk interface is the active communication link.
Status messages (continued)
Message Meaning