Lexmark 19Z0201 - X 862dte 4 B/W Laser, Руководство пользователя

Страница: 168 / 283

154
Chapter 8: Understanding printer messages
52 Flash Full There is not enough space available to hold the resources you want to store in
flash memory.
• Press Go to clear the message and continue processing. Downloaded fonts
and macros not previously stored in flash memory or disk are deleted.
• Reset the printer. Press Menu> or <Menu . The Job Menu is displayed. Press
Menu> or <Menu until Reset Printer appears on the second line. Press Select .
53 Unformatted Flash The flash memory installed in your printer has not been formatted. You must
format the flash memory before downloading resources.
Press
Go
to clear the message. To format flash memory, select Format Flash from
the Utilities Menu.
54 Serial Option x Error The printer has detected a protocol error on the specified serial interface. Make
sure the serial interface parameters are set up correctly and you are using an
appropriate serial cable.
• Press Go to clear the message and continue printing. The job may not print
correctly.
• Reset the printer. Press Menu> or <Menu . The Job Menu is displayed. Press
Menu>
or
<Menu
until Reset Printer appears on the second line. Press
Select
.
54 Serial x Fax Connection Lost The printer has detected the external modem that was once connected to the
serial port is no longer responding. If the printer has been configured to receive
faxes from a serial port and the Fax Port setting is not set to disabled, it will poll the
modem. If it detects the modem connection is missing, it displays the attendance
message. If the modem connection is re-established, the printer removes the
message from the display.
If the modem has been intentionally disconnected, you can press Go to clear the
message and continue printing.
54 Std Par ENA
Connection Lost An External Network Adapter (ENA) that was once connected to the standard
parallel port is no longer responding. The printer only recognizes the missing
connection when the printer power is first turned on.
• Make sure the cable connecting the ENA and the printer is securely attached.
Turn the printer off and then on again to see if the printer recognizes the
connection.
• Press
Go
to clear the message. The printer erases any reference to the ENA
and then resets.
54 Network x Software Error The printer software has detected that a network port is installed and cannot
establish communications with it.
Press Go to clear the message. The printer disables all communications to the
associated network interface. No data can be transmitted through this interface.
You can program new firmware in the network interface through the parallel port
after this message has been cleared.
Attendance messages (continued)
Message Action