Lexmark 19Z0201 - X 862dte 4 B/W Laser, Руководство пользователя

Страница: 167 / 283

153
Chapter 8: Understanding printer messages
37 Insufficient Defrag Memory The printer is unable to perform the requested Flash Memory Defragment
operation because the printer does not have enough memory. This message is
posted before the operation begins to ensure items in flash memory are not lost.
• Press Go to clear the message.
– If you want to perform the defragment operation, delete fonts, macros, and
other data in RAM and try again or install more memory.
37 Insufficient Memory
Held Jobs may be Lost. Go/
Stop? The printer is unable to perform the requested Print and Hold operation because
the printer does not have enough memory.
• Press Go to clear the message. The printer starts to free memory by deleting
the oldest held job and continue deleting held jobs until enough memory has
been freed to process the incoming job.
• Press Stop to clear the message. Incoming data that was not stored will be lost.
38 Memory Full The printer is processing the job, but the memory used to store pages is full.
• Press
Go
to clear the message and continue printing. Some data may not print
or may not print correctly.
• Cancel the print job. Press Menu> or <Menu . The Job Menu is displayed. Press
Menu> or <Menu until Cancel Job appears on the second line. Press Select .
To reduce the complexity of the job:
– Reduce the number of graphics or images on a page.
– Delete unnecessary downloaded fonts or macros.
– Change the Print Quality setting.
• Install additional printer memory to avoid future Memory Full errors.
39 Complex Page The text, graphics, and print information on the page require more memory to print
than what you have installed in your printer.
• Press Go to clear the message and continue printing. Some data may not print
or may not print correctly.
• Cancel the print job. Press Menu> or <Menu . The Job Menu is displayed. Press
Menu> or <Menu until Cancel Job appears on the second line. Press Select .
To avoid another Complex Page error:
– Set Page Protect On from the Setup Menu and resend the job.
– Reduce the complexity of the page by using fewer fonts, macros, and
graphics.
– Install additional printer memory.
51 Defective Flash The flash card installed in your printer is defective. Press
Go
to clear the message
and continue printing. You must install a different flash card before you can
perform any flash functions.
Attendance messages (continued)
Message Action