Lenovo ThinkSystem NE0152T, Руководство по установке

Страница: 53 / 110

© Copyright Lenovo 2018 Chapter 3: Installing NE0152T Hardware and Options
53
Note: The transceiver has a mechanical guide key to prevent you from inserting
the transceiver in an incorrect orientation.
3. Pull up the locking lever to lock the transceiver into place.
4.
Connect the fiber-optic cable following the “Cabling Guidelines” on page 36 .
To remove an SFP optical transceiver, disconnect the fiber-optic cable, and pull
down the locking lever to release the transceiver. After you remove the transceiver,
replace the safety cap.
Installing an SFP+ Optical Transceiver
Approved 10 GbE SFP+ optical transceivers are supported in NE0152T SFP+ port
slots and in some breakout adapters that can be installed in SFP+ port slots. The
SFP+ optical transceiver provides two fiber-optic cable connectors for connecting to
external ports.
Statement 3
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
 Do not remove the covers. Removing the covers of the laser product could result
in exposure to hazardous laser radiation. There are no serviceable parts inside
the device.
 Use of controls or adjustments or performance of procedures other than those
specified herein might result in hazardous radiation exposure.
DANGER
Class 1 Laser Product
Laser Klasse 1
Laser Klass 1
Luokan 1 Laserlaite
Appareil À Laser de Classe 1
Some laser products contain an embedded Class 3A or Class 3B laser diode.
Note the following.
Laser radiation when open. Do not stare into the beam, do not view directly
with optical instruments, and avoid direct exposure to the beam.