Lenovo ThinkSystem NE0152T, Руководство по установке

Страница: 52 / 110

52
NE0152T Installation Guide
Installing an SFP Optical Transceiver
Approved 1 GbE SFP optical transceivers are supported in NE0152T SFP+ port slots
and in some breakout adapters that can be installed in SFP+ port slots. The SFP
optical transceiver provides two fiber-optic cable connectors for connecting to
external ports.
Statement 3
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
 Do not remove the covers. Removing the covers of the laser product could result
in exposure to hazardous laser radiation. There are no serviceable parts inside
the device.
 Use of controls or adjustments or performance of procedures other than those
specified herein might result in hazardous radiation exposure.
DANGER
Class 1 Laser Product
Laser Klasse 1
Laser Klass 1
Luokan 1 Laserlaite
Appareil À Laser de Classe 1
To install an SFP optical transceiver in an SFP+ port slot on the switch, complete the
following steps.
Note: To avoid damage to the cable or the SFP transceiver, do not connect the cable
before you install the transceiver.
1. Remove the safety cap and pull the locking lever into the down (unlocked)
position.
2. Insert the transceiver into the slot until it clicks into place. Use minimal pressure
when you insert the transceiver. Do not use excessive force when you insert the
transceiver or you might damage the transceiver or the slot.
Some laser products contain an embedded Class 3A or Class 3B laser diode.
Note the following.
Laser radiation when open. Do not stare into the beam, do not view directly
with optical instruments, and avoid direct exposure to the beam.