Lenovo ThinkSystem NE0152T Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 110

background image

16

NE0152T Installation Guide

NE0152T Documentation

This

Installation Guide

provides information and instructions for installing the

NE0152T, updating the firmware, and solving problems. For other information
about configuration and management of the switch, refer to the documents
described in

“Related Documentation” on page 16

Notes:



The illustrations in this document might differ slightly from your hardware.



The console output described or referenced in this document might differ
slightly from that displayed by your system. Output varies according to the type
of Lenovo chassis and the firmware versions and options that are installed.

Notices and Statements in this Document

The following notices and statements are used in this document:



Note:

These notices provide important tips, guidance, or advice.



Important:

These notices provide information or advice that might help you

avoid inconvenient or problem situations.



Attention:

These notices indicate potential damage to programs, devices, or

data. An attention notice is placed just before the instruction or situation in
which damage could occur.



Caution:

These statements indicate situations that can be potentially hazardous

to you. A caution statement is placed just before the description of a potentially
hazardous procedure step or situation.



Danger:

These statements indicate situations that can be potentially lethal or

extremely hazardous to you. A danger statement is placed just before the
description of a potentially lethal or extremely hazardous procedure step or
situation.

Related Documentation

Additional or updated product documents may be available from the Lenovo
website. Such documents may cover features not described in the original
documentation that comes with the switch, or may include technical updates or
corrections.

You can obtain up-to-date information on the Lenovo support website:

http://support.lenovo.com/

Note:

Changes are made periodically to the Lenovo website. Procedures for

locating firmware and documentation might vary slightly from what is described
in this document.

For information about switch hardware and firmware features, specifications, and
standards, including their configuration, see the

Application Guide

for your specific

switch and its installed firmware.

«
...
14
15
16
17
18
...
»

Содержание ThinkSystem NE0152T















































































































Отзывы:

Нет отзывов

Похожие инструкции для ThinkSystem NE0152T

DGS-3224TGR - Switch

Бренд: D-Link Страницы: 160

Бренд: D-Link Страницы: 145

DGS-1510 Series

Бренд: D-Link Страницы: 64

DES-3528 - xStack Switch - Stackable

Бренд: D-Link Страницы: 367

RackSwitch G8264

Бренд: IBM Страницы: 20

Flex System FC3171

Бренд: IBM Страницы: 64

Switch 4500 Family

Бренд: 3Com Страницы: 16

PathBuilder S200 Series

Бренд: 3Com Страницы: 32

Бренд: Waters Network Systems Страницы: 16

Crouse-Hinds CEAG KO

Бренд: Cooper Страницы: 12

Бренд: Linksys Страницы: 3

Edge RTM-ATCA-F140

Бренд: Penguin Страницы: 2

Бренд: Fairchild Страницы: 19

TurboIron 24X series

Бренд: Brocade Communications Systems Страницы: 82

Master View CS-74A

Бренд: ATEN Страницы: 16

Бренд: Kramer Страницы: 11

Бренд: Omega Engineering Страницы: 16

Бренд: CoolGear Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды