INTRODUCTION
e-BALTIC-IOM-2020.12-EN
2
EMC DIRECTIVE COMPLIANCE
WARNING:
This equipment is a
“B
class”
according EMC Directive. In an industrial environment, this device can create radio electrical
noise. In this case, the owner can be asked to take appropriated actions.
The units meet the following hardest environments standards:
•
EN 61000-6-3: program for residential, commercial and light industry applications.
•
EN 61000-6-2: immunity for industrial applications
This applies to all units installed with nominal amps below <75A:
•
The short-circuit rate Rsce=33 is defined in the EN61000-3-12 standard relative to the harmonics readings on
the supply network. The appliances compliant with the harmonic current limits equivalent to Rsce=33 can be
connected in whatever connection point of the main supply system.
•
The maximal allowable impedance of the main supply system
Zmax=0.30 Ω for units C,D,E,E+ and Zmax=0.143Ω
for units F,G,H is defined by EN 61000-3-11 standard relative to the voltage variation, fluctuation and flicker
readings. The connection to the supply is a conditional connection submitted to the preliminary agreement of the
power supply local provider.
The differences between the various machines are only related to the power of the compressors and equipment that are
associated. For conducted and radiated emission and immunity, these differences do not alter the results.
F-Gas REGULATION
PLEASE READ THE SAFETY DATA SHEET OF THE REFRIGERANT BEFORE ANY INTERVENTION OR INSTALLATION OF THE MACHINE.
Operators of refrigeration equipment’s must comply with the obligations defined in
•
Regulation on Fluorinated greenhouse gases (F Gas)
•
Regulation on substances that deplete the ozone layer
Non-compliance with these requirements is an offence and liable of financial penalties.
Moreover, in case of problem it is mandatory to prove to the insurance company that the equipment complies with the F
gas Regulation, as well as that all measures have been taken to safeguard people, environment and property.
WARRANTY
The warranty of the unit is subject to the warranty definitions as agreed upon in the order. It is expected that the design
and installation of the unit utilizes good working practices. The warranty will be legally null and void if:
•
Service and maintenance have not been executed in accordance with the regulations; repairs have not been
carried out by LENNOX personnel or have been implemented without prior written permission by LENNOX.
•
Modifications have been made to the equipment without prior written permission by LENNOX.
•
Settings and protections have been modified without prior written permission by LENNOX.
•
Non-original or other than the prescribed refrigerants or lubricants are used.
•
The equipment has not been installed and/or connected in accordance with the installation instructions.
•
The equipment is being used improperly, incorrectly, negligently or not in accordance with its nature and/or purpose.
•
A flow protection device is not fitted.
•
The unit maintenance booklet is not complete or not available.
In these circumstances LENNOX is indemnified from any product liability claims from third parties.
In the event of a warranty claim the machine serial number and LENNOX order number must be quoted.
The technical information and specifications contained in this manual are for reference only. The manufacturer reserves the
right to modify these without warning and without obligation to modify equipment already sold
Содержание e-Baltic D BOX 55
Страница 51: ...HEAT RECOVERY e BALTIC IOM 2020 12 EN 48 STEP 3 FITTING STEP 4 CHECK 0 15 mm SAME LEVEL...
Страница 91: ......
