Leica GR10, Руководство по эксплуатации

Страница: 225 / 317

Printed Documentation
GNNS Spider / Remote Access
Overview
On the GR10 receiver per default no port is open for remote access from any OWI software. In order to allow OWI
access, a port must be defined and opened.
The OWI software can then change the receiver configuration and define and start data streams and a logging
session.
In order to use any non-Leica OWI software with a GR10 receiver, a option key is required.
Spider and remote access
The
Receiver setup: Spider and remote access
page lists all ports on the GR10 receiver that are open for any
OWI based tool to connect to the receiver and change the settings via OWI commands.
The page also allows creating new OWI ports and editing or deleting configured ports.
Access to the GR10 receiver can be configured via
•
TCP/IP server connection
•
TCP/IP client connection
•
NTRIP connection
•
Serial port
•
Modem
•
Radio
It is also possible to connect a GR10 receiver to the GNSS Spider site server via a USB connection. In this case, the
connection will be handled like a network connection via an Ethernet cable.
Please see the chapter Spider and remote access: Overview for more detailed information on how to configure a
remote access.
224