Leica GR10 Скачать руководство пользователя

Страница: 74 / 317

6: Context sensitive help

Status: Tracking

Status tracking: General

Field Description

The table below describes the fields in the Status: General tab.

The information shown is dependent on the settings configured on the

GNSS management:

Tracking

page and which satellite options are available on the receiver.

If the satellite health setting has been changed to a user defined setting in the

GNSS

management: Tracking

page, then the satellite PRN will be displayed in brackets to indicate that

this is not the almanac transmitted health status for that satellite.

Press the

Refresh icon

to update the displayed data.

Field

Description

Date of GPS almanac

The date and time of the GPS almanac.

Date of GLONASS
almanac

The date and time of the GLONASS almanac.

Only available for receivers with the GLONASS option.

Date of GALILEO
almanac

The date and time of the GALILEO almanac.

Only available for receivers with the GALILEO option.

Time signal

Shows the oscillator configured on the receiver. If no external oscillator is used,

Internal clock

is shown.

Satellite Health

GPS, GLONASS, Galileo and SBAS

Healthy

Lists the PRN numbers of the healthy satellites.

Bad

Lists the PRN numbers of the unhealthy satellites. The satellites are available in
the almanac but are flagged unhealthy.

Not available

Lists the PRN numbers of the unavailable satellites. The satellites are not
available in the almanac.

GNSS management: Tracking

Содержание GR10






























































































































































































































































































































Результаты поиска

Содержание GR10

Отзывы:

Похожие инструкции для GR10

Бренды по названию

Популярные бренды

Leica GR10, Руководство по эксплуатации

Результаты поиска

Содержание GR10

Отзывы:

Похожие инструкции для GR10

Бренды по названию

Популярные бренды