Leica GR10, Руководство по эксплуатации

Страница: 172 / 317

6: Context sensitive help
Spider and remote access
Spider and remote access: Overview
Background Information
The Spider and remote access configuration page lists all ports on the GR10 receiver that are open for any OWI
based tool to connect to the receiver and change the settings via OWI commands.
Leica GNSS Spider or other OWI based tools can be connected to the receiver via
•
TCP/IP server
•
TCP/IP client
•
Serial port
•
Radio
•
GSM / Modem / CDMA
It is also possible to connect a receiver to the GNSS Spider site server via a USB connection. The receiver must be
connected directly to the Spider site server using the USB cable. Use the default USB connection settings (IP
address 192.168.254.2) to configure the site in Leica GNSS Spider.
It is recommended to configure two remote access ports as a minimum to utilise the GNSS Spider feature - backup
communication. Detailed information on this topic can be found in the GNSS Spider online help.
Mozilla Firefox does not support the use of certain ports. Use a different internet browser if these
ports need to be used. Ports blocked by default in Mozilla Firefox browser .
Setting Descriptions
The table below describes the fields in the Spider and remote access page.
Setting Description
Icon Connection is active. Port is open.
Connection is inactive. Port is closed.
To activate or deactivate a session press the Activate icon.
Allow connection via
The configured connection type that is used on GNSS Spider
and the receiver.
Device
The configure device used for the remote access.
Port
The configure port on the receiver used for the remote access.
Delete
Press delete to permanently delete the remote access port
configuration.
171